Features: It is a simple user programmable wireless remote control switch. The receiver has an output way /working way which can be changed as desired to match the transmitter. It has 4 Relays which can make 2 DC motors turn or reverse, on/off.
1. It covers applications ranging from a simple domestic remote control to home automation control, like auto door, window, lifting equipment, entrance access, up and down the controller, alarm system industrial control and security, etc.
2. The remote control is designed to control a wide variety of electronic devices with RF signals.
3. Extremely easy to set up and use.
4. It is compatible with 2262 / 2260 / 1527 / 2240 etc chip and several code wireless remote control. So it can meet someone’s need of choosing the wireless remote control as they like to work with it.
Learning Setting Instructions:
1. Briefly press the learning button on the module, the indicator LED will flash, then release your finger.
Press any button of the remote control, the indicator LED flashes 2 times and off, meaning it learned successfully.
2. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control.
3.Remove/clean: Press the learning button about 8 seconds, the indicator turn on to off, it means the earlier information has been removed successfully.
4. Each receiver is individually controlled and will not affect each
Output setting
1. Self-lock: Connect the JP1 with the jumper.
2. Jog mode: The jumper is not used, at JP1 and JP2.
3. Inter-lock mode: Connect the JP2 with the jumper,
Output for working
Jog: Press one
button for ON, and then release the button for OFF
Self -lock: Press one button for one time is ON, press the same button again is OFF Inter-lock: Press one button for ON, press another button for OFF
Receiver Specifications:
1. Operating voltage: DC12V
2. Standing condition: < 6mA
3. Temperature range: -40°c+80°c
4. Receiver sensitivity: better than -105dBm
5. The frequency used: 433mhz
6. Output contact voltage: DC
7. Output contact current: Less than 3A
8. Max load current: 10A
9. Size: 72 x 52 x 26mm
Remote for the receiver module :
1. Remote Range: 200M
2. Working Voltage: DC 6V (2*3V battery)
3. Operating Frequency: 433mhz
4. Operating Current: 13 mA
5. Code Option: Fixed code / Learning code
6. Size: 58 x 39 x 14mm
7. Battery: 2 nos CR2016 button battery
very good